/* * HND Run Time Environment for standalone MIPS programs. * * Copyright 2005, Broadcom Corporation * All Rights Reserved. * * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. * * $Id: mipsinc.h,v 1.1.1.3 2005/03/07 07:31:12 kanki Exp $ */ #ifndef _MISPINC_H #define _MISPINC_H /* MIPS defines */ #ifdef _LANGUAGE_ASSEMBLY /* * Symbolic register names for 32 bit ABI */ #define zero $0 /* wired zero */ #define AT $1 /* assembler temp - uppercase because of ".set at" */ #define v0 $2 /* return value */ #define v1 $3 #define a0 $4 /* argument registers */ #define a1 $5 #define a2 $6 #define a3 $7 #define t0 $8 /* caller saved */ #define t1 $9 #define t2 $10 #define t3 $11 #define t4 $12 #define t5 $13 #define t6 $14 #define t7 $15 #define s0 $16 /* callee saved */ #define s1 $17 #define s2 $18 #define s3 $19 #define s4 $20 #define s5 $21 #define s6 $22 #define s7 $23 #define t8 $24 /* caller saved */ #define t9 $25 #define jp $25 /* PIC jump register */ #define k0 $26 /* kernel scratch */ #define k1 $27 #define gp $28 /* global pointer */ #define sp $29 /* stack pointer */ #define fp $30 /* frame pointer */ #define s8 $30 /* same like fp! */ #define ra $31 /* return address */ /* ********************************************************************* * CP0 Registers ********************************************************************* */ #define C0_INX $0 #define C0_RAND $1 #define C0_TLBLO0 $2 #define C0_TLBLO C0_TLBLO0 #define C0_TLBLO1 $3 #define C0_CTEXT $4 #define C0_PGMASK $5 #define C0_WIRED $6 #define C0_BADVADDR $8 #define C0_COUNT $9 #define C0_TLBHI $10 #define C0_COMPARE $11 #define C0_SR $12 #define C0_STATUS C0_SR #define C0_CAUSE $13 #define C0_EPC $14 #define C0_PRID $15 #define C0_CONFIG $16 #define C0_LLADDR $17 #define C0_WATCHLO $18 #define C0_WATCHHI $19 #define C0_XCTEXT $20 #define C0_DIAGNOSTIC $22 #define C0_BROADCOM C0_DIAGNOSTIC #define C0_ECC $26 #define C0_CACHEERR $27 #define C0_TAGLO $28 #define C0_TAGHI $29 #define C0_ERREPC $30 #define C0_DESAVE $31 /* * LEAF - declare leaf routine */ #define LEAF(symbol) \ .globl symbol; \ .align 2; \ .type symbol,@function; \ .ent symbol,0; \ symbol: .frame sp,0,ra /* * END - mark end of function */ #define END(function) \ .end function; \ .size function,.-function #define _ULCAST_ #else /* * The following macros are especially useful for __asm__ * inline assembler. */ #ifndef __STR #define __STR(x) #x #endif #ifndef STR #define STR(x) __STR(x) #endif #define _ULCAST_ (unsigned long) /* ********************************************************************* * CP0 Registers ********************************************************************* */ #define C0_INX 0 /* CP0: TLB Index */ #define C0_RAND 1 /* CP0: TLB Random */ #define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ #define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ #define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ #define C0_CTEXT 4 /* CP0: Context */ #define C0_PGMASK 5 /* CP0: TLB PageMask */ #define C0_WIRED 6 /* CP0: TLB Wired */ #define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ #define C0_COUNT 9 /* CP0: Count */ #define C0_TLBHI 10 /* CP0: TLB EntryHi */ #define C0_COMPARE 11 /* CP0: Compare */ #define C0_SR 12 /* CP0: Processor Status */ #define C0_STATUS C0_SR /* CP0: Processor Status */ #define C0_CAUSE 13 /* CP0: Exception Cause */ #define C0_EPC 14 /* CP0: Exception PC */ #define C0_PRID 15 /* CP0: Processor Revision Indentifier */ #define C0_CONFIG 16 /* CP0: Config */ #define C0_LLADDR 17 /* CP0: LLAddr */ #define C0_WATCHLO 18 /* CP0: WatchpointLo */ #define C0_WATCHHI 19 /* CP0: WatchpointHi */ #define C0_XCTEXT 20 /* CP0: XContext */ #define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ #define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ #define C0_ECC 26 /* CP0: ECC */ #define C0_CACHEERR 27 /* CP0: CacheErr */ #define C0_TAGLO 28 /* CP0: TagLo */ #define C0_TAGHI 29 /* CP0: TagHi */ #define C0_ERREPC 30 /* CP0: ErrorEPC */ #define C0_DESAVE 31 /* CP0: DebugSave */ #endif /* _LANGUAGE_ASSEMBLY */ /* * Memory segments (32bit kernel mode addresses) */ #undef KUSEG #undef KSEG0 #undef KSEG1 #undef KSEG2 #undef KSEG3 #define KUSEG 0x00000000 #define KSEG0 0x80000000 #define KSEG1 0xa0000000 #define KSEG2 0xc0000000 #define KSEG3 0xe0000000 #define PHYSADDR_MASK 0x1fffffff /* * Map an address to a certain kernel segment */ #undef PHYSADDR #undef KSEG0ADDR #undef KSEG1ADDR #undef KSEG2ADDR #undef KSEG3ADDR #define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK) #define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0) #define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1) #define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2) #define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3) #ifndef Index_Invalidate_I /* * Cache Operations */ #define Index_Invalidate_I 0x00 #define Index_Writeback_Inv_D 0x01 #define Index_Invalidate_SI 0x02 #define Index_Writeback_Inv_SD 0x03 #define Index_Load_Tag_I 0x04 #define Index_Load_Tag_D 0x05 #define Index_Load_Tag_SI 0x06 #define Index_Load_Tag_SD 0x07 #define Index_Store_Tag_I 0x08 #define Index_Store_Tag_D 0x09 #define Index_Store_Tag_SI 0x0A #define Index_Store_Tag_SD 0x0B #define Create_Dirty_Excl_D 0x0d #define Create_Dirty_Excl_SD 0x0f #define Hit_Invalidate_I 0x10 #define Hit_Invalidate_D 0x11 #define Hit_Invalidate_SI 0x12 #define Hit_Invalidate_SD 0x13 #define Fill_I 0x14 #define Hit_Writeback_Inv_D 0x15 /* 0x16 is unused */ #define Hit_Writeback_Inv_SD 0x17 #define R5K_Page_Invalidate_S 0x17 #define Hit_Writeback_I 0x18 #define Hit_Writeback_D 0x19 /* 0x1a is unused */ #define Hit_Writeback_SD 0x1b /* 0x1c is unused */ /* 0x1e is unused */ #define Hit_Set_Virtual_SI 0x1e #define Hit_Set_Virtual_SD 0x1f #endif #ifndef _LANGUAGE_ASSEMBLY /* * Macros to access the system control coprocessor */ #define MFC0(source, sel) \ ({ \ int __res; \ __asm__ __volatile__( \ ".set\tnoreorder\n\t" \ ".set\tnoat\n\t" \ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ "move\t%0,$1\n\t" \ ".set\tat\n\t" \ ".set\treorder" \ :"=r" (__res) \ : \ :"$1"); \ __res; \ }) #define MTC0(source, sel, value) \ do { \ __asm__ __volatile__( \ ".set\tnoreorder\n\t" \ ".set\tnoat\n\t" \ "move\t$1,%z0\n\t" \ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ ".set\tat\n\t" \ ".set\treorder" \ : \ :"jr" (value) \ :"$1"); \ } while (0) #define get_c0_count() \ ({ \ int __res; \ __asm__ __volatile__( \ ".set\tnoreorder\n\t" \ ".set\tnoat\n\t" \ "mfc0\t%0,$9\n\t" \ ".set\tat\n\t" \ ".set\treorder" \ :"=r" (__res)); \ __res; \ }) static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize) { uint lsz, sets, ways; /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ if ((lsz = ((config1 >> 19) & 7))) lsz = 2 << lsz; sets = 64 << ((config1 >> 22) & 7); ways = 1 + ((config1 >> 16) & 7); *size = lsz * sets * ways; *lsize = lsz; } static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize) { uint lsz, sets, ways; /* Data Cache Size = Associativity * Line Size * Sets Per Way */ if ((lsz = ((config1 >> 10) & 7))) lsz = 2 << lsz; sets = 64 << ((config1 >> 13) & 7); ways = 1 + ((config1 >> 7) & 7); *size = lsz * sets * ways; *lsize = lsz; } #define cache_unroll(base,op) \ __asm__ __volatile__(" \ .set noreorder; \ .set mips3; \ cache %1, (%0); \ .set mips0; \ .set reorder" \ : \ : "r" (base), \ "i" (op)); #endif /* !_LANGUAGE_ASSEMBLY */ /* * R4x00 interrupt enable / cause bits */ #undef IE_SW0 #undef IE_SW1 #undef IE_IRQ0 #undef IE_IRQ1 #undef IE_IRQ2 #undef IE_IRQ3 #undef IE_IRQ4 #undef IE_IRQ5 #define IE_SW0 (1<< 8) #define IE_SW1 (1<< 9) #define IE_IRQ0 (1<<10) #define IE_IRQ1 (1<<11) #define IE_IRQ2 (1<<12) #define IE_IRQ3 (1<<13) #define IE_IRQ4 (1<<14) #define IE_IRQ5 (1<<15) /* * Bitfields in the mips32 cp0 status register */ #define ST0_IE 0x00000001 #define ST0_EXL 0x00000002 #define ST0_ERL 0x00000004 #define ST0_UM 0x00000010 #define ST0_SWINT0 0x00000100 #define ST0_SWINT1 0x00000200 #define ST0_HWINT0 0x00000400 #define ST0_HWINT1 0x00000800 #define ST0_HWINT2 0x00001000 #define ST0_HWINT3 0x00002000 #define ST0_HWINT4 0x00004000 #define ST0_HWINT5 0x00008000 #define ST0_IM 0x0000ff00 #define ST0_NMI 0x00080000 #define ST0_SR 0x00100000 #define ST0_TS 0x00200000 #define ST0_BEV 0x00400000 #define ST0_RE 0x02000000 #define ST0_RP 0x08000000 #define ST0_CU 0xf0000000 #define ST0_CU0 0x10000000 #define ST0_CU1 0x20000000 #define ST0_CU2 0x40000000 #define ST0_CU3 0x80000000 /* * Bitfields in the mips32 cp0 cause register */ #define C_EXC 0x0000007c #define C_EXC_SHIFT 2 #define C_INT 0x0000ff00 #define C_INT_SHIFT 8 #define C_SW0 0x00000100 #define C_SW1 0x00000200 #define C_IRQ0 0x00000400 #define C_IRQ1 0x00000800 #define C_IRQ2 0x00001000 #define C_IRQ3 0x00002000 #define C_IRQ4 0x00004000 #define C_IRQ5 0x00008000 #define C_WP 0x00400000 #define C_IV 0x00800000 #define C_CE 0x30000000 #define C_CE_SHIFT 28 #define C_BD 0x80000000 /* Values in C_EXC */ #define EXC_INT 0 #define EXC_TLBM 1 #define EXC_TLBL 2 #define EXC_TLBS 3 #define EXC_AEL 4 #define EXC_AES 5 #define EXC_IBE 6 #define EXC_DBE 7 #define EXC_SYS 8 #define EXC_BPT 9 #define EXC_RI 10 #define EXC_CU 11 #define EXC_OV 12 #define EXC_TR 13 #define EXC_WATCH 23 #define EXC_MCHK 24 /* * Bits in the cp0 config register. */ #define CONF_CM_CACHABLE_NO_WA 0 #define CONF_CM_CACHABLE_WA 1 #define CONF_CM_UNCACHED 2 #define CONF_CM_CACHABLE_NONCOHERENT 3 #define CONF_CM_CACHABLE_CE 4 #define CONF_CM_CACHABLE_COW 5 #define CONF_CM_CACHABLE_CUW 6 #define CONF_CM_CACHABLE_ACCELERATED 7 #define CONF_CM_CMASK 7 #define CONF_CU (_ULCAST_(1) << 3) #define CONF_DB (_ULCAST_(1) << 4) #define CONF_IB (_ULCAST_(1) << 5) #define CONF_SE (_ULCAST_(1) << 12) #define CONF_SC (_ULCAST_(1) << 17) #define CONF_AC (_ULCAST_(1) << 23) #define CONF_HALT (_ULCAST_(1) << 25) /* * Bits in the cp0 config register select 1. */ #define CONF1_FP 0x00000001 /* FPU present */ #define CONF1_EP 0x00000002 /* EJTAG present */ #define CONF1_CA 0x00000004 /* mips16 implemented */ #define CONF1_WR 0x00000008 /* Watch registers present */ #define CONF1_PC 0x00000010 /* Performance counters present */ #define CONF1_DA_SHIFT 7 /* D$ associativity */ #define CONF1_DA_MASK 0x00000380 #define CONF1_DA_BASE 1 #define CONF1_DL_SHIFT 10 /* D$ line size */ #define CONF1_DL_MASK 0x00001c00 #define CONF1_DL_BASE 2 #define CONF1_DS_SHIFT 13 /* D$ sets/way */ #define CONF1_DS_MASK 0x0000e000 #define CONF1_DS_BASE 64 #define CONF1_IA_SHIFT 16 /* I$ associativity */ #define CONF1_IA_MASK 0x00070000 #define CONF1_IA_BASE 1 #define CONF1_IL_SHIFT 19 /* I$ line size */ #define CONF1_IL_MASK 0x00380000 #define CONF1_IL_BASE 2 #define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ #define CONF1_IS_MASK 0x01c00000 #define CONF1_IS_BASE 64 #define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */ #define CONF1_MS_SHIFT 25 /* PRID register */ #define PRID_COPT_MASK 0xff000000 #define PRID_COMP_MASK 0x00ff0000 #define PRID_IMP_MASK 0x0000ff00 #define PRID_REV_MASK 0x000000ff #define PRID_COMP_LEGACY 0x000000 #define PRID_COMP_MIPS 0x010000 #define PRID_COMP_BROADCOM 0x020000 #define PRID_COMP_ALCHEMY 0x030000 #define PRID_COMP_SIBYTE 0x040000 #define PRID_IMP_BCM4710 0x4000 #define PRID_IMP_BCM3302 0x9000 #define PRID_IMP_BCM3303 0x9100 #define PRID_IMP_BCM3303 0x9100 #define PRID_IMP_UNKNOWN 0xff00 #define BCM330X(id) \ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) /* Bits in C0_BROADCOM */ #define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */ #define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */ #define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */ #define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */ /* PreFetch Cache aka Read Ahead Cache */ #define PFC_CR0 0xff400000 /* control reg 0 */ #define PFC_CR1 0xff400004 /* control reg 1 */ /* * These are the UART port assignments, expressed as offsets from the base * register. These assignments should hold for any serial port based on * a 8250, 16450, or 16550(A). */ #define UART_RX 0 /* In: Receive buffer (DLAB=0) */ #define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ #define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ #define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ #define UART_LCR 3 /* Out: Line Control Register */ #define UART_MCR 4 /* Out: Modem Control Register */ #define UART_LSR 5 /* In: Line Status Register */ #define UART_MSR 6 /* In: Modem Status Register */ #define UART_SCR 7 /* I/O: Scratch Register */ #define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ #define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ #define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ #define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ #define UART_LSR_RXRDY 0x01 /* Receiver ready */ #endif /* _MISPINC_H */