imported original firmware WRT54GL_v4.30.11_11_US

1 files changed, 117 insertions, 0 deletions

diff --git a/release/src/include/sbpci.h b/release/src/include/sbpci.h
new file mode 100644
index 00000000..ee4d5172
--- /dev/null
+++ b/release/src/include/sbpci.h
@@ -0,0 +1,117 @@
+/*
+ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions.
+ *
+ * $Id: sbpci.h,v 1.1.1.8 2005/03/07 07:31:12 kanki Exp $
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ */
+
+#ifndef	_SBPCI_H
+#define	_SBPCI_H
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define	_PADLINE(line)	pad ## line
+#define	_XSTR(line)	_PADLINE(line)
+#define	PAD		_XSTR(__LINE__)
+#endif
+
+/* Sonics side: PCI core and host control registers */
+typedef struct sbpciregs {
+	uint32 control;		/* PCI control */
+	uint32 PAD[3];
+	uint32 arbcontrol;	/* PCI arbiter control */
+	uint32 PAD[3];
+	uint32 intstatus;	/* Interrupt status */
+	uint32 intmask;		/* Interrupt mask */
+	uint32 sbtopcimailbox;	/* Sonics to PCI mailbox */
+	uint32 PAD[9];
+	uint32 bcastaddr;	/* Sonics broadcast address */
+	uint32 bcastdata;	/* Sonics broadcast data */
+	uint32 PAD[2];
+	uint32 gpioin;		/* ro: gpio input (>=rev2) */
+	uint32 gpioout;		/* rw: gpio output (>=rev2) */
+	uint32 gpioouten;	/* rw: gpio output enable (>= rev2) */
+	uint32 gpiocontrol;	/* rw: gpio control (>= rev2) */
+	uint32 PAD[36];
+	uint32 sbtopci0;	/* Sonics to PCI translation 0 */
+	uint32 sbtopci1;	/* Sonics to PCI translation 1 */
+	uint32 sbtopci2;	/* Sonics to PCI translation 2 */
+	uint32 PAD[445];
+	uint16 sprom[36];	/* SPROM shadow Area */
+	uint32 PAD[46];
+} sbpciregs_t;
+
+/* PCI control */
+#define PCI_RST_OE	0x01	/* When set, drives PCI_RESET out to pin */
+#define PCI_RST		0x02	/* Value driven out to pin */
+#define PCI_CLK_OE	0x04	/* When set, drives clock as gated by PCI_CLK out to pin */
+#define PCI_CLK		0x08	/* Gate for clock driven out to pin */	
+
+/* PCI arbiter control */
+#define PCI_INT_ARB	0x01	/* When set, use an internal arbiter */
+#define PCI_EXT_ARB	0x02	/* When set, use an external arbiter */
+#define PCI_PARKID_MASK	0x06	/* Selects which agent is parked on an idle bus */
+#define PCI_PARKID_SHIFT   1
+#define PCI_PARKID_LAST	   0	/* Last requestor */
+#define PCI_PARKID_4710	   1	/* 4710 */
+#define PCI_PARKID_EXTREQ0 2	/* External requestor 0 */
+#define PCI_PARKID_EXTREQ1 3	/* External requestor 1 */
+
+/* Interrupt status/mask */
+#define PCI_INTA	0x01	/* PCI INTA# is asserted */
+#define PCI_INTB	0x02	/* PCI INTB# is asserted */
+#define PCI_SERR	0x04	/* PCI SERR# has been asserted (write one to clear) */
+#define PCI_PERR	0x08	/* PCI PERR# has been asserted (write one to clear) */
+#define PCI_PME		0x10	/* PCI PME# is asserted */
+
+/* (General) PCI/SB mailbox interrupts, two bits per pci function */
+#define	MAILBOX_F0_0	0x100	/* function 0, int 0 */
+#define	MAILBOX_F0_1	0x200	/* function 0, int 1 */
+#define	MAILBOX_F1_0	0x400	/* function 1, int 0 */
+#define	MAILBOX_F1_1	0x800	/* function 1, int 1 */
+#define	MAILBOX_F2_0	0x1000	/* function 2, int 0 */
+#define	MAILBOX_F2_1	0x2000	/* function 2, int 1 */
+#define	MAILBOX_F3_0	0x4000	/* function 3, int 0 */
+#define	MAILBOX_F3_1	0x8000	/* function 3, int 1 */
+
+/* Sonics broadcast address */
+#define BCAST_ADDR_MASK	0xff	/* Broadcast register address */
+
+/* Sonics to PCI translation types */
+#define SBTOPCI0_MASK	0xfc000000
+#define SBTOPCI1_MASK	0xfc000000
+#define SBTOPCI2_MASK	0xc0000000
+#define SBTOPCI_MEM	0
+#define SBTOPCI_IO	1
+#define SBTOPCI_CFG0	2
+#define SBTOPCI_CFG1	3
+#define	SBTOPCI_PREF	0x4		/* prefetch enable */
+#define	SBTOPCI_BURST	0x8		/* burst enable */
+#define	SBTOPCI_RC_MASK		0x30	/* read command (>= rev11) */
+#define	SBTOPCI_RC_READ		0x00	/* memory read */
+#define	SBTOPCI_RC_READLINE	0x10	/* memory read line */
+#define	SBTOPCI_RC_READMULTI	0x20	/* memory read multiple */
+
+/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */
+#define cap_list	rsvd_a[0]
+#define bar0_window	dev_dep[0x80 - 0x40]
+#define bar1_window	dev_dep[0x84 - 0x40]
+#define sprom_control	dev_dep[0x88 - 0x40]
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+extern int sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
+extern int sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
+extern void sbpci_ban(uint16 core);
+extern int sbpci_init(void *sbh);
+extern void sbpci_check(void *sbh);
+
+#endif /* !_LANGUAGE_ASSEMBLY */
+
+#endif	/* _SBPCI_H */