imported original firmware WRT54GL_v4.30.11_11_US

1 files changed, 755 insertions, 0 deletions

diff --git a/release/src/router/Makefile b/release/src/router/Makefile
new file mode 100644
index 00000000..26d05f09
--- /dev/null
+++ b/release/src/router/Makefile
@@ -0,0 +1,755 @@
+#
+# Broadcom Linux Router Makefile
+# 
+# Copyright 2005, Broadcom Corporation
+# All Rights Reserved.
+# 
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# $Id: Makefile,v 1.65.26.5 2006/07/20 01:22:42 honor Exp $
+#
+
+include .config
+ifneq ($(wildcard ../cy_conf.mak),)
+  include ../cy_conf.mak
+endif
+
+#
+# Paths
+#
+
+# Source bases
+export PLATFORM LINUXDIR LIBDIR USRLIBDIR
+export TOP := $(shell pwd)
+export SRCBASE := $(shell (cd $(TOP)/.. && pwd -P))
+
+#
+# Cross-compile environment variables
+#
+
+# Build platform
+export BUILD := i386-pc-linux-gnu
+export HOSTCC := gcc
+
+# uClibc wrapper
+ifeq ($(CONFIG_UCLIBC),y)
+export PLATFORM := $(PLATFORM)-uclibc
+endif
+
+ifeq ($(PLATFORM),mipsel)
+export CROSS_COMPILE := mipsel-linux-
+export CONFIGURE := ./configure mipsel-linux --build=$(BUILD)
+export TOOLCHAIN := $(shell cd $(dir $(shell which $(CROSS_COMPILE)gcc))/../mipsel-linux && pwd -P)
+endif
+
+ifeq ($(PLATFORM),mipsel-uclibc)
+export CROSS_COMPILE := mipsel-uclibc-
+export CONFIGURE := ./configure mipsel-linux --build=$(BUILD)
+export TOOLCHAIN := $(shell cd $(dir $(shell which $(CROSS_COMPILE)gcc))/.. && pwd -P)
+endif
+
+
+ifeq ($(CONFIG_BCMWPA2),y)
+export CFLAGS += -DBCMWPA2 
+endif
+
+export CC := $(CROSS_COMPILE)gcc
+export AR := $(CROSS_COMPILE)ar
+export AS := $(CROSS_COMPILE)as
+export LD := $(CROSS_COMPILE)ld
+export NM := $(CROSS_COMPILE)nm
+export RANLIB := $(CROSS_COMPILE)ranlib
+export STRIP := $(CROSS_COMPILE)strip
+export SIZE := $(CROSS_COMPILE)size
+
+#
+# Install and target directories
+#
+
+export PLATFORMDIR := $(TOP)/$(PLATFORM)
+export INSTALLDIR := $(PLATFORMDIR)/install
+export TARGETDIR := $(PLATFORMDIR)/target
+
+# always build libbcmcrypto
+obj-y += libbcmcrypto 
+
+#
+# Configuration
+#
+CONFIG_IPTABLES=y
+
+obj-$(CONFIG_NVRAM) += nvram
+obj-$(CONFIG_SHARED) += shared
+obj-$(CONFIG_LIBBCM) += libbcm
+obj-$(CONFIG_HTTPD) += httpd
+obj-$(CONFIG_RC) += rc
+obj-$(CONFIG_WWW) += www
+obj-$(CONFIG_GLIBC) += lib
+obj-$(CONFIG_UCLIBC) += lib
+obj-$(CONFIG_WLCONF) += wlconf
+obj-$(CONFIG_BRIDGE) += bridge
+obj-$(CONFIG_BUSYBOX) += busybox
+obj-$(CONFIG_DNSMASQ) += dnsmasq
+obj-$(CONFIG_IPTABLES) += iptables
+obj-$(CONFIG_LIBIPT) += iptables
+obj-$(CONFIG_NAS) += nas
+obj-$(CONFIG_SES) += ses
+obj-$(CONFIG_EZC) += ezc
+obj-$(CONFIG_NETCONF) += netconf
+obj-$(CONFIG_NTP) += ntpclient
+obj-$(CONFIG_PPP) += ppp
+obj-$(CONFIG_UDHCPD) += udhcpd
+obj-$(CONFIG_UPNP) += upnp
+obj-$(CONFIG_UTILS) += utils
+obj-$(CONFIG_ETC) += etc
+obj-$(CONFIG_VLAN) += vlan
+
+obj-$(CONFIG_OPENSSL) += openssl
+#obj-$(CONFIG_LIBNET) += net
+#obj-$(CONFIG_LIBPCAP) += pcap
+
+##################################################################
+CONFIG_OTHERS=y
+
+ifeq ($(HSIAB_SUPPORT),1)
+CONFIG_OPENSSL=y
+CONFIG_HTTPD_R=y
+CONFIG_HSIAB=y
+CONFIG_SSLCLIENT=y
+obj-$(CONFIG_HTTPD_R) += httpd_r
+obj-$(CONFIG_HSIAB) += hsiab
+obj-$(CONFIG_SSLCLIENT) += sslclient
+endif
+ifeq ($(HTTPS_SUPPORT),1)
+CONFIG_OPENSSL=y
+endif
+ifeq ($(SNMP_SUPPORT),1)
+CONFIG_OPENSSL=y
+endif
+ifeq ($(MDNS_SUPPORT),1)
+CONFIG_MDNS=y
+obj-$(CONFIG_MDNS) += mDNS
+endif
+ifeq ($(EMI_TEST),1)
+CONFIG_EMITEST=y
+CONFIG_WLTEST=y
+obj-$(CONFIG_EMITEST) += emi
+obj-$(CONFIG_WLTEST) += wltest
+endif
+ifeq ($(SNMP_SUPPORT),1)
+obj-$(CONFIG_SNMP) += snmp
+endif
+ifeq ($(L2TP_SUPPORT),1)
+obj-$(CONFIG_L2TP) += rp-l2tp
+endif
+ifeq ($(HEARTBEAT_SUPPORT),1)
+obj-$(CONFIG_HEARTBEAT) += bpalogin
+endif
+ifeq ($(PARENTAL_CONTROL_SUPPORT),1)
+ ifeq ($(LOCALE),EUROPE)
+ obj-$(CONFIG_PARENTAL_CONTROL) += artemis_old
+ else
+ obj-$(CONFIG_PARENTAL_CONTROL) += artemis
+ endif
+endif
+
+ifeq ($(WAKE_ON_LAN_SUPPORT),1)
+obj-$(CONFIG_WAKE_ON_LAN) += wol
+endif
+
+ifeq ($(TINYLOGIN_SUPPORT),1)
+obj-$(CONFIG_TINYLOGIN) += tinylogin
+endif
+
+ifeq ($(SAMBA_SUPPORT),1)
+obj-$(CONFIG_SAMBA) += samba
+endif
+
+ifeq ($(MULTICAST_SUPPORT),1)
+obj-$(CONFIG_MULTICAST) += igmp-proxy
+endif
+
+ifeq ($(VERIZON_LAN_SUPPORT),1)
+obj-$(CONFIG_VERIZON_LAN) += dhcprelay
+endif
+
+obj-$(CONFIG_TFTPD) += tftpd
+obj-$(CONFIG_CRON) += cron
+obj-$(CONFIG_PPTP) += pptp-client
+obj-$(CONFIG_PPPD) += pppd
+#obj-$(CONFIG_ZEBRA) += zebra
+obj-$(CONFIG_DDNS) += ipupdate
+obj-$(CONFIG_OPENSSL) += openssl
+obj-$(CONFIG_OTHERS) += others
+obj-$(CONFIG_DIAG) += traceroute
+
+ifeq ($(RXP_SUPPORT),1)
+obj-$(CONFIG_RXP) += rxp
+endif
+
+ifeq ($(PEANUTHULL_SUPPORT),1)
+obj-$(CONFIG_PEANUTHULL) += peanuthull 
+endif
+
+ifeq ($(EOU_SUPPORT),1)
+obj-$(CONFIG_EOU) += eou
+endif
+
+ifeq ($(HW_QOS_SUPPORT),1)
+obj-$(CONFIG_HW_QOS) += iproute2
+endif
+
+ifeq ($(PPPOE_SERVER_SUPPORT),1)
+obj-$(CONFIG_PPPOE_SERVER) += rp-pppoe
+endif
+ifeq ($(PPPOE_RELAY_SUPPORT),1)
+obj-$(CONFIG_PPPOE_RELAY) += rp-pppoe
+endif
+ifeq ($(UTELNETD_SUPPORT),1)
+obj-$(CONFIG_UTELNETD) += utelnetd
+endif
+
+
+obj-$(CONFIG_ZEBRA) += zebra
+
+obj-clean := $(foreach obj,$(obj-y) $(obj-n),$(obj)-clean)
+obj-install := $(foreach obj,$(obj-y),$(obj)-install)
+
+#
+# Basic rules
+#
+
+all: clean_target $(obj-y) $(LINUXDIR)/.config
+	# Also build kernel
+	# first make dep
+	$(MAKE) -C $(LINUXDIR) dep
+	if ! grep -q "CONFIG_EMBEDDED_RAMDISK=y" $(LINUXDIR)/.config ; then \
+	    $(MAKE) -C $(LINUXDIR) zImage ; \
+	fi
+	if grep -q "CONFIG_MODULES=y" $(LINUXDIR)/.config ; then \
+	    $(MAKE) -C $(LINUXDIR) modules ; \
+	fi
+
+clean: $(obj-clean)
+	rm -rf $(TARGETDIR)
+	rm -f $(PLATFORMDIR)/linux.trx $(PLATFORMDIR)/vmlinuz $(PLATFORMDIR)/target.image
+	if grep -q "MULTILANG_SUPPORT=1" ../cy_conf.mak ; then \
+		rm -f $(PLATFORMDIR)/*lang.trx ; \
+		rm -f $(PLATFORMDIR)/*lang.image ; \
+		rm -f $(PLATFORMDIR)/lcode.* ; \
+	fi
+
+clean_target: 
+	rm -rf $(TARGETDIR)
+	rm -f $(PLATFORMDIR)/linux.trx $(PLATFORMDIR)/vmlinuz $(PLATFORMDIR)/target.image
+
+distclean mrproper: clean
+	rm -f .config $(LINUXDIR)/.config
+
+optimize-lib:
+	#../../tools/optimize_lib.sh netconf/ libnetconf.so libnetconf.a libnetconf_min.so $(TARGETDIR) $(TARGETDIR)/usr/lib/libnetconf.so
+	find $(TARGETDIR) -name ".svn" | xargs rm -rf
+ifeq ($(CONFIG_OPENSSL),y)
+	../../tools/optimize_lib.sh openssl/ libcrypto.so libcrypto.a libcrypto_min.so $(TARGETDIR) $(TARGETDIR)/usr/lib/libcrypto.so
+	../../tools/optimize_lib.sh openssl/ libssl.so libssl.a libssl_min.so $(TARGETDIR) $(TARGETDIR)/usr/lib/libssl.so
+endif
+ifeq ($(ZEBRA_SUPPORT),1)
+	../../tools/optimize_lib.sh zebra/lib/ libzebra.so libzebra.a libzebra_min.so $(TARGETDIR) $(TARGETDIR)/usr/lib/libzebra.so
+endif
+	../../tools/optimize_lib.sh shared/ libshared.so libshared.a libshared_min.so $(TARGETDIR) $(TARGETDIR)/usr/lib/libshared.so
+	../../tools/optimize_lib.sh lib/ libm.so libm.a libm_min.so $(TARGETDIR) $(TARGETDIR)/lib/libm.so.0
+	../../tools/optimize_lib.sh busybox/ libbb.so libbb.a libbb_min.so $(TARGETDIR) $(TARGETDIR)/usr/lib/libbb.so
+	../../tools/optimize_lib.sh iptables/ libiptables.so libiptables.a libiptables_min.so $(TARGETDIR) $(TARGETDIR)/usr/lib/libiptables.so
+
+install package: $(filter-out lib-install,$(obj-install)) $(LINUXDIR)/.config
+	# Install binaries into target directory
+	install -d $(TARGETDIR)
+	for dir in $(wildcard $(patsubst %,$(INSTALLDIR)/%,$(obj-y))) ; do \
+	    (cd $${dir} && tar cpf - .) | (cd $(TARGETDIR) && tar xpf -) \
+	done
+	# optimize the crypto library by removing unneeded symbols
+	[ ! -d libbcmcrypto ] || $(MAKE) -C libbcmcrypto optimize
+	# Install (and possibly optimize) C library
+	$(MAKE) lib-install
+	# optimize the others library by removing unneeded symbols
+	$(MAKE) optimize-lib
+	# Install modules into filesystem
+	if grep -q "CONFIG_MODULES=y" $(LINUXDIR)/.config ; then \
+	    $(MAKE) -C $(LINUXDIR) modules_install DEPMOD=/bin/true INSTALL_MOD_PATH=$(TARGETDIR) ; \
+	fi
+	find $(TARGETDIR) -name "wl_*.o"  | xargs rm -rf
+	# Prepare filesystem
+	cd $(TARGETDIR) && $(TOP)/misc/rootprep.sh
+	cd $(TARGETDIR)  &&  find . -iname "CVS" | xargs rm -rf
+	# Make sure mkcramfs-2.0 is used
+	if grep -q "CONFIG_SQUASHFS=y" $(LINUXDIR)/.config ; then \
+	    $(MAKE) -C $(LINUXDIR)/scripts/squashfs ; \
+	    $(LINUXDIR)/scripts/squashfs/mksquashfs $(TARGETDIR) $(PLATFORMDIR)/target.image -info ; \
+	    if grep -q "MULTILANG_SUPPORT=1" ../cy_conf.mak ; then \
+	            rm -f $(PLATFORMDIR)/*lang.* ; \
+	            rm -f $(PLATFORMDIR)/lcode.trx ; \
+		    $(LINUXDIR)/scripts/squashfs/mksquashfs www/$(WEB_PAGE) $(PLATFORMDIR)/default_lang.image -info ; \
+	    fi \
+	elif grep -q "CONFIG_CRAMFS=y" $(LINUXDIR)/.config ; then \
+	    $(MAKE) -C $(LINUXDIR)/scripts/cramfs mkcramfs ; \
+	    if grep -q "CONFIG_LZMA_FS_INFLATE=y" $(LINUXDIR)/.config ; then \
+	        $(LINUXDIR)/scripts/cramfs/mkcramfs -l $(TARGETDIR) $(PLATFORMDIR)/target.image ; \
+		    if grep -q "MULTILANG_SUPPORT=1" ../cy_conf.mak ; then \
+		            rm -f $(PLATFORMDIR)/*lang.* ; \
+		            rm -f $(PLATFORMDIR)/lcode.trx ; \
+			    $(LINUXDIR)/scripts/cramfs/mkcramfs -l www/$(WEB_PAGE) $(PLATFORMDIR)/default_lang.image ; \
+		    fi \
+	    else \
+	        $(LINUXDIR)/scripts/cramfs/mkcramfs $(TARGETDIR) $(PLATFORMDIR)/target.image ; \
+		    if grep -q "MULTILANG_SUPPORT=1" ../cy_conf.mak ; then \
+		            rm -f $(PLATFORMDIR)/*lang.* ; \
+		            rm -f $(PLATFORMDIR)/lcode.trx ; \
+			    $(LINUXDIR)/scripts/cramfs/mkcramfs www/$(WEB_PAGE) $(PLATFORMDIR)/default_lang.image ; \
+		    fi \
+	    fi \
+	fi
+	# Package kernel and filesystem
+	if grep -q "CONFIG_EMBEDDED_RAMDISK=y" $(LINUXDIR)/.config ; then \
+	    cp $(PLATFORMDIR)/target.image $(LINUXDIR)/arch/mips/ramdisk/$${CONFIG_EMBEDDED_RAMDISK_IMAGE} ; \
+	    $(MAKE) -C $(LINUXDIR) zImage ; \
+	else \
+	    cp $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz $(PLATFORMDIR)/ ; \
+	    trx -o $(PLATFORMDIR)/linux.trx $(PLATFORMDIR)/vmlinuz $(PLATFORMDIR)/target.image ; \
+	    if grep -q "MULTILANG_SUPPORT=1" ../cy_conf.mak ; then \
+		    trx -o $(PLATFORMDIR)/lcode.trx $(PLATFORMDIR)/vmlinuz $(PLATFORMDIR)/target.image ; \
+		    trx -o $(PLATFORMDIR)/default_lang.trx $(PLATFORMDIR)/default_lang.image ; \
+	    fi \
+	fi
+
+	# Pad self-booting Linux to a 64 KB boundary
+	cp $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage $(PLATFORMDIR)/
+	dd conv=sync bs=64k < $(PLATFORMDIR)/zImage > $(PLATFORMDIR)/linux.bin
+	# Append filesystem to self-booting Linux
+	cat $(PLATFORMDIR)/target.image >> $(PLATFORMDIR)/linux.bin
+
+#
+# Configuration rules
+#
+
+conf mconf:
+	$(MAKE) -C config
+	@./config/$@ ./config/Config
+	# Also configure kernel
+	$(MAKE) k$@
+
+oldconf: .config
+	$(MAKE) -C config
+	@./config/conf -o ./config/Config
+	# Also configure kernel
+	$(MAKE) k$@
+
+kconf:
+	$(MAKE) -C $(LINUXDIR) config
+
+kmconf:
+	$(MAKE) -C $(LINUXDIR) menuconfig
+
+koldconf: $(LINUXDIR)/.config
+	$(MAKE) -C $(LINUXDIR) oldconfig
+
+# Convenience
+config: conf
+
+menuconfig: mconf
+
+oldconfig: oldconf
+
+# Default configurations
+.config:
+	cp config/defconfig $@
+	$(MAKE) oldconfig
+
+$(LINUXDIR)/.config:
+	cp $(LINUXDIR)/arch/mips/defconfig-bcm947xx $@
+
+#
+# Overrides
+#
+
+OLDBBCFG=$(shell basename $$(readlink busybox/Config.h))
+CURBBCFG=$(CONFIG_BUSYBOX_CONFIG).h
+
+busybox/Config.h: dummy
+ifneq ($(OLDBBCFG),$(CURBBCFG))
+	cd busybox && rm -f Config.h && ln -sf configs/$(CURBBCFG) Config.h && touch Config.h
+endif
+
+busybox: busybox/Config.h
+	$(MAKE) -C busybox STRIPTOOL=$(STRIP)
+
+busybox-install:
+	$(MAKE) -C busybox STRIPTOOL=$(STRIP) PREFIX=$(INSTALLDIR)/busybox install
+
+httpd: nvram shared openssl hsiab
+	$(MAKE) -C httpd
+
+rc: netconf nvram shared openssl hsiab libnet
+ifneq ($(CONFIG_BUSYBOX),)
+rc: busybox/Config.h
+endif
+
+www www-%:
+	$(MAKE) -C www/$(WEB_PAGE) $* INSTALLDIR=$(INSTALLDIR)/www
+
+bridge:
+	$(MAKE) -C bridge brctl/brctl
+
+bridge-install:
+	install -D bridge/brctl/brctl $(INSTALLDIR)/bridge/usr/sbin/brctl
+	$(STRIP) $(INSTALLDIR)/bridge/usr/sbin/brctl
+
+dnsmasq-install:
+	install -D dnsmasq/dnsmasq $(INSTALLDIR)/dnsmasq/usr/sbin/dnsmasq
+	$(STRIP) $(INSTALLDIR)/dnsmasq/usr/sbin/dnsmasq
+
+iptables:
+	$(MAKE) -C iptables BINDIR=/usr/sbin LIBDIR=/usr/lib KERNEL_DIR=$(LINUXDIR)
+
+iptables-install:
+ifeq ($(CONFIG_IPTABLES),y)
+	install -d $(INSTALLDIR)/iptables/usr/lib/iptables
+	install iptables/extensions/*.so $(INSTALLDIR)/iptables/usr/lib/iptables
+	$(STRIP) $(INSTALLDIR)/iptables/usr/lib/iptables/*.so
+	install -D iptables/iptables $(INSTALLDIR)/iptables/usr/sbin/iptables
+	$(STRIP) $(INSTALLDIR)/iptables/usr/sbin/iptables
+	install -D iptables/iptables-restore $(INSTALLDIR)/iptables/usr/sbin/iptables-restore
+	$(STRIP) $(INSTALLDIR)/iptables/usr/sbin/iptables-restore
+	install -D iptables/libiptables.so $(INSTALLDIR)/iptables/usr/lib/libiptables.so
+	$(STRIP) $(INSTALLDIR)/iptables/usr/lib/libiptables.so
+else
+	# So that generic rule does not take precedence
+	@true
+endif
+
+iptables-clean:
+	-$(MAKE) -C iptables KERNEL_DIR=$(LINUXDIR) clean
+
+
+netconf: iptables
+
+ntpclient-install:
+	install -D ntpclient/ntpclient $(INSTALLDIR)/ntpclient/usr/sbin/ntpclient
+	$(STRIP) $(INSTALLDIR)/ntpclient/usr/sbin/ntpclient
+
+ppp ppp-%:
+	$(MAKE) -C ppp/pppoecd $* INSTALLDIR=$(INSTALLDIR)/ppp
+
+udhcpd: shared nvram
+
+udhcpd-install:
+	install -D udhcpd/udhcpd $(INSTALLDIR)/udhcpd/usr/sbin/udhcpd
+	install -D udhcpd/dumpleases $(INSTALLDIR)/udhcpd/usr/sbin/dumpleases
+	$(STRIP) $(INSTALLDIR)/udhcpd/usr/sbin/udhcpd
+	$(STRIP) $(INSTALLDIR)/udhcpd/usr/sbin/dumpleases
+	cd $(INSTALLDIR)/udhcpd/usr/sbin && ln -sf udhcpd udhcpc
+
+upnp: netconf nvram shared
+
+wlconf: nvram shared
+
+vlan:
+	$(MAKE) -C vlan CROSS=$(CROSS_COMPILE) STRIPTOOL=$(STRIP)
+
+vlan-install:
+	$(MAKE) -C vlan CROSS=$(CROSS_COMPILE) STRIPTOOL=$(STRIP) INSTALLDIR=$(INSTALLDIR) install
+
+vlan-clean:
+	$(MAKE) -C vlan clean
+
+nas-install:
+	cd $(INSTALLDIR)/nas/usr/sbin && ln -sf nas nas4not
+
+libbcm:
+	[ ! -f libbcm/Makefile ] || $(MAKE) -C libbcm
+
+libbcm-install:
+	install -D libbcm/libbcm.so $(INSTALLDIR)/libbcm/usr/lib/libbcm.so
+	$(STRIP) $(INSTALLDIR)/libbcm/usr/lib/libbcm.so
+
+ses:
+	[ ! -f ses/Makefile ] || $(MAKE) -C ses
+
+ses-install:
+	install -D ses/ses/ses $(INSTALLDIR)/ses/usr/sbin/ses
+	$(STRIP) $(INSTALLDIR)/ses/usr/sbin/ses
+
+########################################################################
+# Below is added by CT
+
+tftpd-install:
+	[ ! -d tftpd ] || install -D tftpd/tftpd $(INSTALLDIR)/tftpd/usr/sbin/tftpd
+	$(STRIP) $(INSTALLDIR)/tftpd/usr/sbin/tftpd
+
+cron-install:
+	#install -d $(INSTALLDIR)/cron/etc/cron.d
+	install -D cron/cron $(INSTALLDIR)/cron/usr/sbin/cron
+	$(STRIP) $(INSTALLDIR)/cron/usr/sbin/cron
+
+pptp-client-install:
+	install -D pptp-client/pptp $(INSTALLDIR)/pptp-client/usr/sbin/pptp
+	$(STRIP) $(INSTALLDIR)/pptp-client/usr/sbin/pptp
+
+pppd:
+	$(MAKE) -C pppd/pppd
+
+pppd-clean:
+	$(MAKE) -C pppd/pppd clean
+
+pppd-install:
+	install -D pppd/pppd/pppd $(INSTALLDIR)/pppd/usr/sbin/pppd
+	$(STRIP) $(INSTALLDIR)/pppd/usr/sbin/pppd
+
+ipupdate-install:
+	install -D ipupdate/ez-ipupdate $(INSTALLDIR)/ipupdate/usr/sbin/ez-ipupdate
+	$(STRIP) $(INSTALLDIR)/ipupdate/usr/sbin/ez-ipupdate
+
+zebra:
+	$(MAKE) -C zebra CC=$(CC) AR=$(AR) RANLIB=$(RANLIB)
+
+zebra-install:
+	install -D zebra/zebra/zebra $(INSTALLDIR)/zebra/usr/sbin/zebra
+	install -D zebra/ripd/ripd $(INSTALLDIR)/zebra/usr/sbin/ripd
+	install -D zebra/lib/libzebra.so $(INSTALLDIR)/zebra/usr/lib/libzebra.so
+	$(STRIP) $(INSTALLDIR)/zebra/usr/sbin/zebra
+	$(STRIP) $(INSTALLDIR)/zebra/usr/sbin/ripd
+	$(STRIP) $(INSTALLDIR)/zebra/usr/lib/libzebra.so
+
+openssl-install:
+	install -D openssl/libcrypto.so $(INSTALLDIR)/openssl/usr/lib/libcrypto.so
+	$(STRIP) $(INSTALLDIR)/openssl/usr/lib/libcrypto.so
+	install -D openssl/libssl.so $(INSTALLDIR)/openssl/usr/lib/libssl.so
+	$(STRIP) $(INSTALLDIR)/openssl/usr/lib/libssl.so
+	install -D openssl/apps/openssl $(INSTALLDIR)/openssl/usr/sbin/openssl
+	$(STRIP) $(INSTALLDIR)/openssl/usr/sbin/openssl
+
+ifeq ($(PEANUTHULL_SUPPORT),1)
+peanuthull-install:
+	install -D peanuthull/peanuthull $(INSTALLDIR)/peanuthull/usr/sbin/peanuthull
+	$(STRIP) $(INSTALLDIR)/peanuthull/usr/sbin/peanuthull
+endif
+
+ifeq ($(HSIAB_SUPPORT),1)
+httpd_r-install:
+	install -D httpd_r/httpd_r $(INSTALLDIR)/httpd_r/usr/sbin/httpd_r
+	$(STRIP) $(INSTALLDIR)/httpd_r/usr/sbin/httpd_r
+
+hsiab-install:
+	install -D hsiab/libhsiab.so $(INSTALLDIR)/hsiab/usr/lib/libhsiab.so
+	install -D hsiab/test/test_register $(INSTALLDIR)/hsiab/usr/sbin/test_register
+	install -D hsiab/test/test_hsiab $(INSTALLDIR)/hsiab/usr/sbin/test_hsiab
+	$(STRIP) $(INSTALLDIR)/hsiab/usr/lib/libhsiab.so
+	$(STRIP) $(INSTALLDIR)/hsiab/usr/sbin/test_register
+	$(STRIP) $(INSTALLDIR)/hsiab/usr/sbin/test_hsiab
+
+sslclient: openssl
+	$(MAKE) -C sslclient
+
+sslclient-install:
+	install -D sslclient/sslclient $(INSTALLDIR)/sslclient/usr/sbin/sslclient
+	install -D sslclient/root.pem $(INSTALLDIR)/sslclient/etc/root.pem
+	install -D sslclient/client.pem $(INSTALLDIR)/sslclient/etc/client.pem
+	$(STRIP) $(INSTALLDIR)/sslclient/usr/sbin/sslclient
+endif
+
+ifeq ($(MDNS_SUPPORT),1)
+mDNS:
+	$(MAKE) -C mDNS/mDNSPosix os=linux
+
+mDNS-clean:
+	$(MAKE) -C mDNS/mDNSPosix clean
+
+mDNS-install:
+	install -D mDNS/mDNSPosix/build/mDNSResponderPosix $(INSTALLDIR)/mDNS/usr/sbin/mDNSResponderPosix
+	$(STRIP) $(INSTALLDIR)/mDNS/usr/sbin/mDNSResponderPosix
+endif
+
+ifeq ($(EMI_TEST),1)
+emi-install:
+	install -d $(INSTALLDIR)/emi/usr/sbin/
+	cp -f emi/*_* $(INSTALLDIR)/emi/usr/sbin/
+
+wltest-install:
+	install -D wltest/wltest $(INSTALLDIR)/wltest/usr/sbin/wltest
+	$(STRIP) $(INSTALLDIR)/wltest/usr/sbin/wltest
+endif
+
+ifeq ($(L2TP_SUPPORT),1)
+rp-l2tp-install:
+	install -d $(INSTALLDIR)/rp-l2tp/usr/lib/l2tp
+	install rp-l2tp/handlers/*.so $(INSTALLDIR)/rp-l2tp/usr/lib/l2tp
+	$(STRIP) $(INSTALLDIR)/rp-l2tp/usr/lib/l2tp/*.so
+	install -D rp-l2tp/handlers/l2tp-control $(INSTALLDIR)/rp-l2tp/usr/sbin/l2tp-control
+	$(STRIP) $(INSTALLDIR)/rp-l2tp/usr/sbin/l2tp-control
+	install -D rp-l2tp/l2tpd $(INSTALLDIR)/rp-l2tp/usr/sbin/l2tpd
+	$(STRIP) $(INSTALLDIR)/rp-l2tp/usr/sbin/l2tpd
+endif
+
+ifeq ($(HEARTBEAT_SUPPORT),1)
+bpalogin-install:
+	install -D bpalogin/bpalogin $(INSTALLDIR)/bpalogin/usr/sbin/bpalogin
+	$(STRIP) $(INSTALLDIR)/bpalogin/usr/sbin/bpalogin
+endif
+
+ifeq ($(MULTICAST_SUPPORT),1)
+igmp-proxy-install:
+	[ ! -d igmp-proxy ] || install -D igmp-proxy/igmprt $(INSTALLDIR)/igmp-proxy/usr/sbin/igmprt
+	$(STRIP) $(INSTALLDIR)/igmp-proxy/usr/sbin/igmprt
+endif
+
+ifeq ($(VERIZON_LAN_SUPPORT),1)
+dhcprelay-install:
+	install -D dhcprelay/dhcrelay $(INSTALLDIR)/dhcprelay/usr/sbin/dhcrelay
+	$(STRIP) $(INSTALLDIR)/dhcprelay/usr/sbin/dhcrelay
+endif
+
+ifeq ($(SNMP_SUPPORT),1)
+snm/libp: openssl
+	$(MAKE) -C snmp CC=$(CC) SHLIB_LD_CMD="$(AR) cr"
+snmp-install:
+	install -D snmp/agent/snmpd $(INSTALLDIR)/snmp/usr/sbin/snmpd
+	$(STRIP) $(INSTALLDIR)/snmp/usr/sbin/snmpd
+	install -D snmp/snmplib/libsnmp.so $(INSTALLDIR)/snmp/usr/lib/libsnmp.so
+	$(STRIP) $(INSTALLDIR)/snmp/usr/lib/libsnmp.so
+	install -D snmp/apps/snmptrap $(INSTALLDIR)/snmp/usr/sbin/snmptrap
+	$(STRIP) $(INSTALLDIR)/snmp/usr/sbin/snmptrap
+	install -D snmp/gen_snmpd_conf/gen_snmpd_conf $(INSTALLDIR)/snmp/usr/sbin/gen_snmpd_conf
+	$(STRIP) $(INSTALLDIR)/snmp/usr/sbin/gen_snmpd_conf
+	install -D snmp/agent/snmpd.conf $(INSTALLDIR)/snmp/usr/local/share/snmp/snmpd.conf
+endif
+
+ifeq ($(PARENTAL_CONTROL_SUPPORT),1)
+artemis: nvram
+	[ ! -d artemis ] || $(MAKE) -C artemis deps
+	[ ! -d artemis ] || $(MAKE) -C artemis CC=$(CC) AR=$(AR)
+
+artemis-install:
+	[ ! -d artemis ] || install -D artemis/LINUX/artemis $(INSTALLDIR)/artemis/usr/sbin/artemis
+	[ ! -d artemis ] || install -D artemis/LINUX/artmain $(INSTALLDIR)/artemis/usr/sbin/artmain
+	$(STRIP) $(INSTALLDIR)/artemis/usr/sbin/artemis
+	$(STRIP) $(INSTALLDIR)/artemis/usr/sbin/artmain
+artemis_old: nvram
+	[ ! -d artemis_old ] || $(MAKE) -C artemis_old deps
+	[ ! -d artemis_old ] || $(MAKE) -C artemis_old CC=$(CC) AR=$(AR)
+
+artemis_old-install:
+	[ ! -d artemis_old ] || install -D artemis_old/LINUX/artemis $(INSTALLDIR)/artemis_old/usr/sbin/artemis
+	[ ! -d artemis_old ] || install -D artemis_old/LINUX/artmain $(INSTALLDIR)/artemis_old/usr/sbin/artmain
+	$(STRIP) $(INSTALLDIR)/artemis_old/usr/sbin/artemis
+	$(STRIP) $(INSTALLDIR)/artemis_old/usr/sbin/artmain
+endif
+
+ifeq ($(EOU_SUPPORT),1)
+eou: libnet libpcap
+	[ ! -d eou ] || $(MAKE) -C eou
+
+eou-install:
+	[ ! -d eou ] || install -D eou/eou $(INSTALLDIR)/eou/usr/sbin/eou
+	$(STRIP) $(INSTALLDIR)/eou/usr/sbin/eou
+
+libnet:
+	-mkdir -p libnet/lib
+	$(MAKE) -C libnet CC=$(CC) AR=$(AR) RANLIB=$(RANLIB)
+
+libpcap:
+	$(MAKE) -C libpcap CC=$(CC) AR=$(AR) RANLIB=$(RANLIB)
+endif
+
+ifeq ($(WAKE_ON_LAN_SUPPORT),1)
+wol: 
+	[ ! -d wol ] || $(MAKE) -C wol
+wol-install:
+	[ ! -d wol ] || install -D wol/ether-wake $(INSTALLDIR)/wol/usr/sbin/ether-wake
+	$(STRIP) $(INSTALLDIR)/wol/usr/sbin/ether-wake
+endif
+
+ifeq ($(SAMBA_SUPPORT),1)
+samba:
+	[ ! -d samba ] || $(MAKE) -C samba CC=$(CC)
+samba-install:
+	[ ! -d samba ] || install -D samba/bin/smbclient $(INSTALLDIR)/samba/usr/sbin/smbclient
+	[ ! -d samba ] || install -D samba/bin/nmblookup $(INSTALLDIR)/samba/usr/sbin/nmblookup 
+	$(STRIP) $(INSTALLDIR)/samba/usr/sbin/smbclient
+	$(STRIP) $(INSTALLDIR)/samba/usr/sbin/nmblookup
+endif
+
+ifeq ($(TINYLOGIN_SUPPORT),1)
+tinylogin:
+	[ ! -d tinylogin ] || $(MAKE) -C tinylogin
+tinylogin-install:
+	[ ! -d tinylogin ] || $(MAKE) -C tinylogin PREFIX=$(INSTALLDIR)/tinylogin install
+endif
+
+traceroute:
+	$(MAKE) -C traceroute CC=$(CC)
+traceroute-install:
+	install -D traceroute/traceroute $(INSTALLDIR)/traceroute/usr/sbin/traceroute
+	$(STRIP) $(INSTALLDIR)/traceroute/usr/sbin/traceroute
+
+ifeq ($(HW_QOS_SUPPORT),1)
+iproute2-install:
+	install -D iproute2/tc/tc $(INSTALLDIR)/iproute2/usr/sbin/tc
+	$(STRIP) $(INSTALLDIR)/iproute2/usr/sbin/tc
+	#install -D iproute2/ip/ip $(INSTALLDIR)/iproute2/usr/sbin/ip
+	#$(STRIP) $(INSTALLDIR)/iproute2/usr/sbin/ip
+	#install -D iproute2/tc/prio.sh $(INSTALLDIR)/iproute2/usr/sbin/prio.sh
+	#install -D iproute2/tc/cbq.sh $(INSTALLDIR)/iproute2/usr/sbin/cbq.sh
+	#install -D iproute2/tc/sfq.sh $(INSTALLDIR)/iproute2/usr/sbin/sfq.sh
+	#install -D iproute2/tc/vlan1.sh $(INSTALLDIR)/iproute2/usr/sbin/vlan1.sh
+endif
+
+ifeq ($(PPPOE_SERVER_SUPPORT),1)
+rp-pppoe:
+	$(MAKE) -C rp-pppoe/src/ pppoe
+	$(MAKE) -C rp-pppoe/src/ pppoe-server
+rp-pppoe-install:
+	install -D rp-pppoe/src/pppoe-server $(INSTALLDIR)/rp-pppoe/usr/sbin/pppoe-server
+	install -D rp-pppoe/src/pppoe $(INSTALLDIR)/rp-pppoe/usr/sbin/pppoe
+	$(STRIP) $(INSTALLDIR)/rp-pppoe/usr/sbin/pppoe-server
+	$(STRIP) $(INSTALLDIR)/rp-pppoe/usr/sbin/pppoe
+endif
+
+ifeq ($(PPPOE_RELAY_SUPPORT),1)
+rp-pppoe:
+	$(MAKE) -C rp-pppoe/src/ pppoe-relay
+rp-pppoe-install:
+	install -D rp-pppoe/src/pppoe-relay $(INSTALLDIR)/rp-pppoe/usr/sbin/pppoe-relay
+	$(STRIP) $(INSTALLDIR)/rp-pppoe/usr/sbin/pppoe-relay
+endif
+ifeq ($(RXP_SUPPORT),1)
+rxp:
+	$(MAKE) -C rxp CC=$(CC) AR=$(AR) RANLIB=$(RANLIB)
+	$(MAKE) -C rxp/example xmlparser1 CC=$(CC)
+rxp-install: 
+	install -D rxp/rxp $(INSTALLDIR)/rxp/usr/sbin/rxp
+	install -D rxp/example/xmlparser1 $(INSTALLDIR)/rxp/usr/sbin/xmlparser1
+	$(STRIP) $(INSTALLDIR)/rxp/usr/sbin/rxp
+	$(STRIP) $(INSTALLDIR)/rxp/usr/sbin/xmlparser1
+
+endif
+
+#
+# Generic rules
+#
+
+%:
+	[ ! -d $* ] || $(MAKE) -C $*
+
+%-clean:
+	[ ! -d $* ] || $(MAKE) -C $* clean
+
+%-install:
+	[ ! -d $* ] || $(MAKE) -C $* install INSTALLDIR=$(INSTALLDIR)/$*
+
+$(obj-y) $(obj-n) $(obj-clean) $(obj-install): dummy
+
+.PHONY: all clean distclean mrproper install package
+.PHONY: conf mconf oldconf kconf kmconf config menuconfig oldconfig
+.PHONY: dummy libnet libpcap