imported original firmware WRT54GL_v4.30.11_11_US

1 files changed, 116 insertions, 0 deletions

diff --git a/release/src/router/busybox/examples/udhcp/udhcpd.conf b/release/src/router/busybox/examples/udhcp/udhcpd.conf
new file mode 100755
index 00000000..2b93e0fa
--- /dev/null
+++ b/release/src/router/busybox/examples/udhcp/udhcpd.conf
@@ -0,0 +1,116 @@
+# Sample udhcpd configuration file (/etc/udhcpd.conf)
+
+# The start and end of the IP lease block
+
+start 		192.168.0.20	#default: 192.168.0.20
+end		192.168.0.254	#default: 192.168.0.254
+
+
+# The interface that udhcpd will use
+
+interface	eth0		#default: eth0
+
+
+# The maximim number of leases (includes addressesd reserved
+# by OFFER's, DECLINE's, and ARP conficts
+
+#max_leases	254		#default: 254
+
+
+# If remaining is true (default), udhcpd will store the time
+# remaining for each lease in the udhcpd leases file. This is
+# for embedded systems that cannot keep time between reboots.
+# If you set remaining to no, the absolute time that the lease
+# expires at will be stored in the dhcpd.leases file.
+
+#remaining	yes		#default: yes
+
+
+# The time period at which udhcpd will write out a dhcpd.leases
+# file. If this is 0, udhcpd will never automatically write a
+# lease file. (specified in seconds)
+
+#auto_time	7200		#default: 7200 (2 hours)
+
+
+# The amount of time that an IP will be reserved (leased) for if a 
+# DHCP decline message is received (seconds).
+
+#decline_time	3600		#default: 3600 (1 hour)
+
+
+# The amount of time that an IP will be reserved (leased) for if an
+# ARP conflct occurs. (seconds
+
+#conflict_time	3600		#default: 3600 (1 hour)
+
+
+# How long an offered address is reserved (leased) in seconds
+
+#offer_time	60		#default: 60 (1 minute)
+
+# If a lease to be given is below this value, the full lease time is
+# instead used (seconds).
+
+#min_lease	60		#defult: 60
+
+
+# The location of the leases file
+
+#lease_file	/var/lib/misc/udhcpd.leases	#defualt: /var/lib/misc/udhcpd.leases
+
+# The location of the pid file
+#pidfile	/var/run/udhcpd.pid	#default: /var/run/udhcpd.pid
+
+# Everytime udhcpd writes a leases file, the below script will be called.
+# Useful for writing the lease file to flash every few hours.
+
+#notify_file				#default: (no script)
+
+#notify_file	dumpleases 	# <--- usefull for debugging
+
+# The following are bootp specific options, setable by udhcpd.
+
+#siaddr		192.168.0.22		#default: 0.0.0.0
+
+#sname		zorak			#default: (none)
+
+#boot_file	/var/nfs_root		#default: (none)
+
+# The remainer of options are DHCP options and can be specifed with the
+# keyword 'opt' or 'option'. If an option can take multiple items, such
+# as the dns option, they can be listed on the same line, or multiple
+# lines. The only option with a default is 'lease'.
+
+#Examles
+opt	dns	192.168.10.2 192.168.10.10
+option	subnet	255.255.255.0
+opt	router	192.168.10.2
+opt	wins	192.168.10.10
+option	dns	129.219.13.81	# appened to above DNS servers for a total of 3
+option	domain	local
+option	lease	864000		# 10 days of seconds
+
+
+# Currently supported options, for more info, see options.c
+#opt subnet
+#opt timezone
+#opt router
+#opt timesvr
+#opt namesvr
+#opt dns
+#opt logsvr
+#opt cookiesvr
+#opt lprsvr
+#opt bootsize
+#opt domain
+#opt swapsvr
+#opt rootpath
+#opt ipttl
+#opt mtu
+#opt broadcast
+#opt wins
+#opt lease
+#opt ntpsrv
+#opt tftp
+#opt bootfile