imported original firmware WRT54GL_v4.30.11_11_US

1 files changed, 147 insertions, 0 deletions

diff --git a/release/src/router/busybox/miscutils/Config.in b/release/src/router/busybox/miscutils/Config.in
new file mode 100755
index 00000000..0c56f0ee
--- /dev/null
+++ b/release/src/router/busybox/miscutils/Config.in
@@ -0,0 +1,147 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Miscellaneous Utilities"
+
+config CONFIG_ADJTIMEX
+	bool "adjtimex"
+	default n
+	help
+	  Adjtimex reads and optionally sets adjustment parameters for
+	  the Linux clock adjustment algorithm.
+
+config CONFIG_CROND
+	bool "crond"
+	default n
+	help
+	  Crond is a background daemon that parses individual crontab
+	  files and executes commands on behalf of the users in question.
+
+config CONFIG_FEATURE_CROND_CALL_SENDMAIL
+	bool "  Using /usr/sbin/sendmail?"
+	default n
+	depends on CONFIG_CROND
+	help
+	  Support call /usr/sbin/sendmail for send cmd outputs.
+
+config CONFIG_CRONTAB
+	bool "crontab"
+	default n
+	help
+	  Crontab manipulates the crontab for a particular user.  Only
+	  the superuser may specify a different user and/or crontab directory.
+
+config CONFIG_DC
+	bool "dc"
+	default n
+	help
+	  Dc is a reverse-polish desk calculator which supports unlimited
+	  precision arithmetic.
+
+config CONFIG_DUTMP
+	bool "dutmp"
+	default n
+	help
+	  'dutmp' is a utility used by the Linux Router Project (as far as I
+	  know nobody else uses it).  It dumps the contents of the utmp file to
+	  STDOUT with each field seperated by a colon.  IP addresses are are
+	  given in hex in native byte order.  It is intended that this format
+	  can then be parsed by shell scripts.
+
+config CONFIG_HDPARM
+	bool "hdparm"
+	default n
+	help
+	  Get/Set hard drive parameters.  Primarily intended for ATA
+	  drives.  Adds about 13k (or around 30k if you enable the 
+	  CONFIG_FEATURE_HDPARM_GET_IDENTITY option)....
+
+config CONFIG_FEATURE_HDPARM_GET_IDENTITY
+	bool "  Support obtaining detailed information directly from drives" 
+	default y
+	depends on CONFIG_HDPARM
+	help
+	  Enables the -I and -Istdin options to obtain detailed information
+	  directly from drives about their capabilities and supported ATA
+	  feature set.  Enabling this option will add about 16k...
+
+config CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
+	bool "  Register an IDE interface (DANGEROUS)" 
+	default n
+	depends on CONFIG_HDPARM
+	help
+	  Enables the 'hdparm -R' option to register an IDE interface.
+	  This is dangerous stuff, so you should probably say N.
+
+config CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
+	bool "  Un-register an IDE interface (DANGEROUS)" 
+	default n
+	depends on CONFIG_HDPARM
+	help
+	  Enables the 'hdparm -U' option to un-register an IDE interface.
+	  This is dangerous stuff, so you should probably say N.
+
+config CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
+	bool "  perform device reset (DANGEROUS)" 
+	default n
+	depends on CONFIG_HDPARM
+	help
+	  Enables the 'hdparm -w' option to perform a device reset.
+	  This is dangerous stuff, so you should probably say N.
+
+config CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
+	bool "  tristate device for hotswap (DANGEROUS)" 
+	default n
+	depends on CONFIG_HDPARM
+	help
+	  Enables the 'hdparm -x' option to tristate device for hotswap,
+	  and the '-b' option to get/set bus state.  This is dangerous
+	  stuff, so you should probably say N.
+
+config CONFIG_MAKEDEVS
+	bool "makedevs"
+	default n
+	help
+	  'makedevs' is a utility used and created by the Linux Router Project.
+	  It creates a large number of device special files (/dev devices)
+	  rather quickly, and can be considerably faster then running mknod a
+	  zillion times.
+
+config CONFIG_MT
+	bool "mt"
+	default n
+	help
+	  Mt is used to control tape devices.  You can use the mt utility
+	  to advance or rewind a tape past a specified number of archive
+	  files on the tape.
+
+config CONFIG_STRINGS
+	bool "strings"
+	default n
+	help
+	  Strings prints the printable character sequences for each file
+	  specified.
+
+config CONFIG_TIME
+	bool "time"
+	default n
+	help
+	  The time command runs the specified program with the given arguments.
+	  When the command finishes, time writes a message to standard output
+	  giving timing statistics about this program run.
+
+config CONFIG_WATCHDOG
+	bool "watchdog"
+	default n
+	help
+	  The watchdog utility is used with hardware or softwate watchdog
+	  device drivers.  It opens the specified watchdog device special file
+	  and periodically writes a magic character to the device.  If the
+	  watchdog applet ever fails to write the magic character within a
+	  certain amount of time, the watchdog device assumes the system has
+	  hung, and will cause the hardware to reboot.
+
+endmenu
+