1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
|
/*
* Hardware-specific External Interface I/O core definitions
* for the BCM47xx family of SiliconBackplane-based chips.
*
* The External Interface core supports a total of three external chip selects
* supporting external interfaces. One of the external chip selects is
* used for Flash, one is used for PCMCIA, and the other may be
* programmed to support either a synchronous interface or an
* asynchronous interface. The asynchronous interface can be used to
* support external devices such as UARTs and the BCM2019 Bluetooth
* baseband processor.
* The external interface core also contains 2 on-chip 16550 UARTs, clock
* frequency control, a watchdog interrupt timer, and a GPIO interface.
*
* Copyright 2005, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
* $Id: sbextif.h,v 1.1.1.7 2005/03/07 07:31:12 kanki Exp $
*/
#ifndef _SBEXTIF_H
#define _SBEXTIF_H
/* external interface address space */
#define EXTIF_PCMCIA_MEMBASE(x) (x)
#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
#define _PADLINE(line) pad ## line
#define _XSTR(line) _PADLINE(line)
#define PAD _XSTR(__LINE__)
#endif /* PAD */
/*
* The multiple instances of output and output enable registers
* are present to allow driver software for multiple cores to control
* gpio outputs without needing to share a single register pair.
*/
struct gpiouser {
uint32 out;
uint32 outen;
};
#define NGPIOUSER 5
typedef volatile struct {
uint32 corecontrol;
uint32 extstatus;
uint32 PAD[2];
/* pcmcia control registers */
uint32 pcmcia_config;
uint32 pcmcia_memwait;
uint32 pcmcia_attrwait;
uint32 pcmcia_iowait;
/* programmable interface control registers */
uint32 prog_config;
uint32 prog_waitcount;
/* flash control registers */
uint32 flash_config;
uint32 flash_waitcount;
uint32 PAD[4];
uint32 watchdog;
/* clock control */
uint32 clockcontrol_n;
uint32 clockcontrol_sb;
uint32 clockcontrol_pci;
uint32 clockcontrol_mii;
uint32 PAD[3];
/* gpio */
uint32 gpioin;
struct gpiouser gpio[NGPIOUSER];
uint32 PAD;
uint32 ejtagouten;
uint32 gpiointpolarity;
uint32 gpiointmask;
uint32 PAD[153];
uint8 uartdata;
uint8 PAD[3];
uint8 uartimer;
uint8 PAD[3];
uint8 uartfcr;
uint8 PAD[3];
uint8 uartlcr;
uint8 PAD[3];
uint8 uartmcr;
uint8 PAD[3];
uint8 uartlsr;
uint8 PAD[3];
uint8 uartmsr;
uint8 PAD[3];
uint8 uartscratch;
uint8 PAD[3];
} extifregs_t;
/* corecontrol */
#define CC_UE (1 << 0) /* uart enable */
/* extstatus */
#define ES_EM (1 << 0) /* endian mode (ro) */
#define ES_EI (1 << 1) /* external interrupt pin (ro) */
#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */
/* gpio bit mask */
#define GPIO_BIT0 (1 << 0)
#define GPIO_BIT1 (1 << 1)
#define GPIO_BIT2 (1 << 2)
#define GPIO_BIT3 (1 << 3)
#define GPIO_BIT4 (1 << 4)
#define GPIO_BIT5 (1 << 5)
#define GPIO_BIT6 (1 << 6)
#define GPIO_BIT7 (1 << 7)
/* pcmcia/prog/flash_config */
#define CF_EN (1 << 0) /* enable */
#define CF_EM_MASK 0xe /* mode */
#define CF_EM_SHIFT 1
#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */
#define CF_EM_SYNC 0x2 /* synchronous mode */
#define CF_EM_PCMCIA 0x4 /* pcmcia mode */
#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */
#define CF_BS (1 << 5) /* byteswap */
#define CF_CD_MASK 0xc0 /* clock divider */
#define CF_CD_SHIFT 6
#define CF_CD_DIV2 0x0 /* backplane/2 */
#define CF_CD_DIV3 0x40 /* backplane/3 */
#define CF_CD_DIV4 0x80 /* backplane/4 */
#define CF_CE (1 << 8) /* clock enable */
#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */
/* pcmcia_memwait */
#define PM_W0_MASK 0x3f /* waitcount0 */
#define PM_W1_MASK 0x1f00 /* waitcount1 */
#define PM_W1_SHIFT 8
#define PM_W2_MASK 0x1f0000 /* waitcount2 */
#define PM_W2_SHIFT 16
#define PM_W3_MASK 0x1f000000 /* waitcount3 */
#define PM_W3_SHIFT 24
/* pcmcia_attrwait */
#define PA_W0_MASK 0x3f /* waitcount0 */
#define PA_W1_MASK 0x1f00 /* waitcount1 */
#define PA_W1_SHIFT 8
#define PA_W2_MASK 0x1f0000 /* waitcount2 */
#define PA_W2_SHIFT 16
#define PA_W3_MASK 0x1f000000 /* waitcount3 */
#define PA_W3_SHIFT 24
/* pcmcia_iowait */
#define PI_W0_MASK 0x3f /* waitcount0 */
#define PI_W1_MASK 0x1f00 /* waitcount1 */
#define PI_W1_SHIFT 8
#define PI_W2_MASK 0x1f0000 /* waitcount2 */
#define PI_W2_SHIFT 16
#define PI_W3_MASK 0x1f000000 /* waitcount3 */
#define PI_W3_SHIFT 24
/* prog_waitcount */
#define PW_W0_MASK 0x0000001f /* waitcount0 */
#define PW_W1_MASK 0x00001f00 /* waitcount1 */
#define PW_W1_SHIFT 8
#define PW_W2_MASK 0x001f0000 /* waitcount2 */
#define PW_W2_SHIFT 16
#define PW_W3_MASK 0x1f000000 /* waitcount3 */
#define PW_W3_SHIFT 24
#define PW_W0 0x0000000c
#define PW_W1 0x00000a00
#define PW_W2 0x00020000
#define PW_W3 0x01000000
/* flash_waitcount */
#define FW_W0_MASK 0x1f /* waitcount0 */
#define FW_W1_MASK 0x1f00 /* waitcount1 */
#define FW_W1_SHIFT 8
#define FW_W2_MASK 0x1f0000 /* waitcount2 */
#define FW_W2_SHIFT 16
#define FW_W3_MASK 0x1f000000 /* waitcount3 */
#define FW_W3_SHIFT 24
/* watchdog */
#define WATCHDOG_CLOCK 48000000 /* Hz */
/* clockcontrol_n */
#define CN_N1_MASK 0x3f /* n1 control */
#define CN_N2_MASK 0x3f00 /* n2 control */
#define CN_N2_SHIFT 8
/* clockcontrol_sb/pci/mii */
#define CC_M1_MASK 0x3f /* m1 control */
#define CC_M2_MASK 0x3f00 /* m2 control */
#define CC_M2_SHIFT 8
#define CC_M3_MASK 0x3f0000 /* m3 control */
#define CC_M3_SHIFT 16
#define CC_MC_MASK 0x1f000000 /* mux control */
#define CC_MC_SHIFT 24
/* Clock control default values */
#define CC_DEF_N 0x0009 /* Default values for bcm4710 */
#define CC_DEF_100 0x04020011
#define CC_DEF_33 0x11030011
#define CC_DEF_25 0x11050011
/* Clock control values for 125Mhz */
#define CC_125_N 0x0802
#define CC_125_M 0x04020009
#define CC_125_M25 0x11090009
#define CC_125_M33 0x11090005
/* Clock control magic field values */
#define CC_F6_2 0x02 /* A factor of 2 in */
#define CC_F6_3 0x03 /* 6-bit fields like */
#define CC_F6_4 0x05 /* N1, M1 or M3 */
#define CC_F6_5 0x09
#define CC_F6_6 0x11
#define CC_F6_7 0x21
#define CC_F5_BIAS 5 /* 5-bit fields get this added */
#define CC_MC_BYPASS 0x08
#define CC_MC_M1 0x04
#define CC_MC_M1M2 0x02
#define CC_MC_M1M2M3 0x01
#define CC_MC_M1M3 0x11
#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */
#endif /* _SBEXTIF_H */
|
