1 files changed, 234 insertions, 0 deletions
diff --git a/docs/log/fid355D8E1583AB011A40E6DD0B35D84F827A3BBEB9.aspx.txt b/docs/log/fid355D8E1583AB011A40E6DD0B35D84F827A3BBEB9.aspx.txt
new file mode 100644
index 0000000..5d5b6da
--- /dev/null
+++ b/docs/log/fid355D8E1583AB011A40E6DD0B35D84F827A3BBEB9.aspx.txt
@@ -0,0 +1,234 @@
+;/*=============================================================================
+; * This is a part of the yLib Software Development Kit.
+; * Copyright (C) 1998-2000 YEAsoft Inc.
+; * All rights reserved.
+; *=============================================================================
+; * This program is free software; you can redistribute it and/or modify
+; * it under the terms of the GNU General Public License as published by
+; * the Free Software Foundation. In addition, you may also charge for any
+; * application using yLib, and are under no obligation to supply source
+; * code. You must accredit YEAsoft Inc. in the "About Box", or banner
+; * of your application. 
+; *
+; * This program is distributed in the hope that it will be useful,
+; * but WITHOUT ANY WARRANTY; without even the implied warranty of
+; * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+; * GNU General Public License for more details.
+; *
+; * You should also have received a copy of the GNU General Public License
+; * with this software, also indicating additional rights you have when using
+; * yLib.
+; *=============================================================================
+; * FILENAME	:	Sample1.mc
+; * PURPOSE		:	yLib application sample
+; * SCOPE		:	yLib SDK
+; * HISTORY		: =============================================================
+; * 
+; * $Log: SampleMsg1.mc,v $
+; * Revision 1.1  2000/05/26 14:07:30  leo
+; * Initial revision
+; *
+; *============================================================================*/
+
+;/*
+;-------------------------------------------------------------------------
+; HEADER SECTION
+;
+; The header section defines names and language identifiers for use
+; by the message definitions later in this file. The MessageIdTypedef,
+; SeverityNames, FacilityNames, and LanguageNames keywords are
+; optional and not required.
+;
+;
+MessageIdTypedef=DWORD
+;
+; The MessageIdTypedef keyword gives a typedef name that is used in a
+; type cast for each message code in the generated include file. Each
+; message code appears in the include file with the format: #define
+; name ((type) 0xnnnnnnnn) The default value for type is empty, and no
+; type cast is generated. It is the programmer's responsibility to
+; specify a typedef statement in the application source code to define
+; the type. The type used in the typedef must be large enough to
+; accomodate the entire 32-bit message code.
+;
+;
+SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS
+               Informational=0x1:STATUS_SEVERITY_INFORMATIONAL
+               Warning=0x2:STATUS_SEVERITY_WARNING
+               Error=0x3:STATUS_SEVERITY_ERROR
+              )
+;
+; The SeverityNames keyword defines the set of names that are allowed
+; as the value of the Severity keyword in the message definition. The
+; set is delimited by left and right parentheses. Associated with each
+; severity name is a number that, when shifted left by 30, gives the
+; bit pattern to logical-OR with the Facility value and MessageId
+; value to form the full 32-bit message code. The default value of
+; this keyword is:
+;
+; SeverityNames=(
+;   Success=0x0
+;   Informational=0x1
+;   Warning=0x2
+;   Error=0x3
+;   )
+;
+; Severity values occupy the high two bits of a 32-bit message code.
+; Any severity value that does not fit in two bits is an error. The
+; severity codes can be given symbolic names by following each value
+; with :name
+;
+;
+FacilityNames=(System=0x0:FACILITY_SYSTEM
+               Runtime=0x2:FACILITY_RUNTIME
+               Stubs=0x3:FACILITY_STUBS
+               Io=0x4:FACILITY_IO_ERROR_CODE
+              )
+;
+; The FacilityNames keyword defines the set of names that are allowed
+; as the value of the Facility keyword in the message definition. The
+; set is delimited by left and right parentheses. Associated with each
+; facility name is a number that, when shift it left by 16 bits, gives
+; the bit pattern to logical-OR with the Severity value and MessageId
+; value to form the full 32-bit message code. The default value of
+; this keyword is:
+;
+; FacilityNames=(
+;   System=0x0FF
+;   Application=0xFFF
+;   )
+;
+; Facility codes occupy the low order 12 bits of the high order
+; 16-bits of a 32-bit message code. Any facility code that does not
+; fit in 12 bits is an error. This allows for 4,096 facility codes.
+; The first 256 codes are reserved for use by the system software. The
+; facility codes can be given symbolic names by following each value
+; with :name
+;
+;
+; The LanguageNames keyword defines the set of names that are allowed
+; as the value of the Language keyword in the message definition. The
+; set is delimited by left and right parentheses. Associated with each
+; language name is a number and a file name that are used to name the
+; generated resource file that contains the messages for that
+; language. The number corresponds to the language identifier to use
+; in the resource table. The number is separated from the file name
+; with a colon. The initial value of LanguageNames is:
+;
+; LanguageNames=(English=1:MSG00001)
+LanguageNames=(
+				German=7:MSG00007
+				Italian=16:MSG00010
+				)
+;
+; Any new names in the source file which don't override the built-in
+; names are added to the list of valid languages. This allows an
+; application to support private languages with descriptive names.
+;
+;
+;-------------------------------------------------------------------------
+; MESSAGE DEFINITION SECTION
+;
+; Following the header section is the body of the Message Compiler
+; source file. The body consists of zero or more message definitions.
+; Each message definition begins with one or more of the following
+; statements:
+;
+; MessageId = [number|+number]
+; Severity = severity_name
+; Facility = facility_name
+; SymbolicName = name
+;
+; The MessageId statement marks the beginning of the message
+; definition. A MessageID statement is required for each message,
+; although the value is optional. If no value is specified, the value
+; used is the previous value for the facility plus one. If the value
+; is specified as +number then the value used is the previous value
+; for the facility, plus the number after the plus sign. Otherwise, if
+; a numeric value is given, that value is used. Any MessageId value
+; that does not fit in 16 bits is an error.
+;
+; The Severity and Facility statements are optional. These statements
+; specify additional bits to OR into the final 32-bit message code. If
+; not specified they default to the value last specified for a message
+; definition. The initial values prior to processing the first message
+; definition are:
+;
+; Severity=Success
+; Facility=Application
+;
+; The value associated with Severity and Facility must match one of
+; the names given in the FacilityNames and SeverityNames statements in
+; the header section. The SymbolicName statement allows you to
+; associate a C/C++ symbolic constant with the final 32-bit message
+; code.
+; */
+
+
+MessageIdTypedef=WORD
+
+MessageId=0x1
+SymbolicName=CAT_NO_PARAMS
+Language=English
+Without Parameters
+.
+Language=German
+Ohne Parameter
+.
+Language=Italian
+Senza Parametri
+.
+
+MessageId=
+SymbolicName=CAT_PARAMS
+Language=English
+With Parameters
+.
+Language=German
+Mit Parameter
+.
+Language=Italian
+Con Parametri
+.
+
+MessageIdTypedef=DWORD
+
+MessageId=0x100
+Severity=Error
+Facility=Runtime
+SymbolicName=MSG_TEST1
+Language=English
+Test message with no parameters
+.
+Language=German
+Test Nachricht ohne Parameter
+.
+Language=Italian
+Messaggio di test senza parametri
+.
+
+MessageId=
+Severity=Error
+SymbolicName=MSG_TEST2
+Language=English
+Test message with one parameter: (%1)
+.
+Language=German
+Test Nachricht mit einen Parameter: (%1)
+.
+Language=Italian
+Messaggio di test con un parametro: (%1)
+.
+
+MessageId=
+Severity=Error
+SymbolicName=MSG_TEST3
+Language=English
+Test message with three parameters: (1:'%1' 2:'%2' 3:'%3')
+.
+Language=German
+Test Nachricht mit drei Parameter: (1:'%1' 2:'%2' 3:'%3')
+.
+Language=Italian
+Messaggio di test con tre parametri: (1:'%1' 2:'%2' 3:'%3')
+.